KBK aluminum alloy track needs to pay attention to many details when using, and if you want to extend the service life of the equipment, you should pay attention to the usual maintenance and maintenance work.
The service life of the device is relatively long, but if the maintenance work is done, the service life can be extended.
Now there are so many industries using this device, and its emergence has brought great help to the development of the industry and reflected its greater value.
Features of aluminum alloy material
1. Low density
The density of aluminum and aluminum alloys is close to 2.7g/, which is about 1/3 of that of iron or copper.
2. High strength
After a certain degree of cold working, the strength of the matrix can be strengthened, and some grades of aluminum alloy can also be strengthened by heat treatment.
3. Good electrical and thermal conductivity
Aluminum's electrical and thermal conductivity is second only to silver, copper, and gold.
4. Good corrosion resistance
When the surface of aluminum is easy to naturally contact with air, a dense oxide film (AL2O3 protective film) will be formed on the surface, which can well protect the substrate from corrosion, so the corrosion resistance is good. If the "alumina film treatment method" is applied to it, it can prevent corrosion completely.
5. Lightweight and soft
The density of aluminum is 2171 g/cm3, which is about one-third of the density of steel; Young's modulus is also about one-third that of steel.
6. Good strength
The tensile strength of pure aluminum is about 80 MN/m2, which is one-fifth that of mild steel. However, after heat treatment and alloying strengthening, it can achieve the corresponding strength value of low carbon steel.
7. Good processability
The extrusion performance of profiles for railway vehicles is good, and the secondary machining and bending processing are also easier.
8. Easy to regenerate
Aluminum has a low melting point (660°C) and is easy to regenerate.
2. Maintenance
1. Look at the instructions for use:
Each device has its instruction manual, and the user should read the instruction manual before using the device, so that they can learn more about the details and problems that need to be paid attention to, and avoid causing unnecessary trouble to the device during use.
2. Find a maintenance person to repair the device:
It is inevitable to encounter some problems in the process of track use, if the enterprise does not understand maintenance, do not find someone to repair, find maintenance personnel to repair, not only can save a lot of time, but also benefit the device, to avoid causing greater problems and affecting the normal work.
3. Test run:
Before using the track device, it is very important to work in the trial operation, you can find out whether there is a problem with the whole equipment in the trial operation, whether the bolt parts of the equipment are imprisoned, whether you need to add lubricants, etc., these can be checked out to ensure the normal use of the device.
4. Do not disassemble parts at will:
The parts on the device are indispensable, if there is damage, it cannot be disassembled, so that the staff can solve the problem, and the replaced parts should also correspond to the model and type, so as to avoid being unable to coordinate and match. After use, the power should be cut off in time: all equipment should be cut off in time after it is stopped in use to avoid being affected by the outside world and causing the equipment to be unusable.
