When the aluminum alloy track is used, the first thing to do is to install it well and check its safety performance, which is the premise of doing a good job. During the installation, the installation environment should be appropriate, pay attention to the cooperation between the track and the trolley, and do a good job in the maintenance of parts. So, what are the precautions when using it? The following is a detailed answer for all readers.
The installation requirements of aluminum alloy tracks are as follows:
1. The installation environment should be appropriate
The aluminum alloy track bears a large amount of force in use, so it must be ensured that its installation environment is appropriate before use, otherwise it is very prone to danger.
For the installation environment, the operating temperature should not be lower than -20 degrees Celsius and not higher than 70 degrees Celsius.
The place of use should not exceed 2,000 meters above sea level, and it should generally be used indoors. If the air and other environments at the place of use are highly corrosive, protective measures should be taken.
2. Pay attention to the coordination between the track and the walking trolley
The walking trolley should run on the aluminum alloy track, so after installing the aluminum alloy track, you must carefully check the match between the track and the trolley.
In order to make the trolley smooth and smooth when passing through the joint, and reduce the resistance, there must be no steps on the track surface that the wheels are in contact with. If the aluminum alloy tracks are suspended at the same time, then be sure to keep them on the same level.
In addition, in order to prevent the slippage of the trolley, it is also necessary to close the end of the track with an end cover, which should be equipped with a buffer device to prevent violent collision with the trolley.
3. The installation and maintenance of parts should be done well
The installation of aluminum alloy track must assemble the relevant parts, once this part is loose, it is easy to slip off the lifting object, etc., bringing operational danger.
Therefore, it is necessary to check carefully before installation, so that the parts are complete, and the original parts cannot be disassembled or modified casually.
Precautions for the use of aluminum alloy tracks:
1. If it is used outdoors or in an environment with corrosive gas, it is necessary to adopt protective measures.
Identifying the working environment of the equipment is the main prerequisite for ensuring the safe operation of the aluminum alloy track, and the accurate identification of the surrounding area of the working environment is also a trick that operators must grasp.
2. Operators must grasp the trick when judging the working environment, and the first thing to do is to judge the wind power if it is working in the dark.
There must be a satisfactory lighting system next to the working environment, so as to ensure that you can see the operation of the heavy object clearly, the binding and hanging status and the place where the heavy object is placed.
3. If the aluminum alloy track runs in rain and snow, the wheel slippage will be very frequent, and the braking operation of the operation organization at this time must have the relevant amount of advance, and the condition of the equipment and wheels should be investigated during the operation together. Of course, in this kind of climatic operation, there must be full-time personnel to monitor and investigate the basis of the trajectory, so as to ensure safe and normal operation.
